Short answer: one 79 per cent duty for the whole of China

Ceramic tableware and kitchenware originating in China is subject to a definitive anti-dumping duty of 79.0 per cent, and it is a single rate for the whole country. There are no longer rates assigned to specific factories, no additional codes that let you go lower, and it does not matter whether your supplier cooperated with the Commission. Only the origin of the goods counts. On top of that comes the ordinary import duty, and VAT is calculated on the total of both.

This is a change that most guides on the Polish internet have not yet registered, and they talk about a range from 13.1 to 36.1 per cent. That range describes the situation before 7 February 2026 and today misleads in a way that costs real money. If you calculate a delivery of mugs on the basis of an older article, you will be wrong by several dozen per cent of the value of the goods.

The second thing people ask most often: the trade name changes nothing here. "New bone china", "bone china", porcelain, stoneware, earthenware and glazed ceramics are the same product for the purposes of the rule. What matters is the customs code, and all these products fall within the scope of the measure.

What exactly changed and when

Commission Implementing Regulation (EU) 2026/274 was adopted on 5 February 2026, published in the Official Journal a day later and entered into force on the day following publication. It amended Article 1 of the existing Regulation 2025/1981 so that a single row remained in the table of rates: People's Republic of China, 79.0 per cent of the net, free-at-Union-frontier price, before duty.

To understand the scale of this change, it is worth seeing what was there before. The preamble of the new act itself summarises the previous situation: individual rates ranged from 13.1 to 18.3 per cent, all cooperating producers not included in the sample had 17.9 per cent, and a residual rate of 36.1 per cent applied to everyone else. An importer who found a good factory was therefore paying roughly one sixth of what they pay today.

It is also worth noting how this came about, because it explains why there is a single rate. On 19 December 2024 the Commission initiated a partial interim review limited solely to dumping, at the request of the European federation of tableware and ornamental ceramics manufacturers. The review ended with a single margin being set for the whole country, rather than a set of margins for individual exporters. A similar direction can be seen in other proceedings we track in the register of anti-dumping duties and described in the overview of measures in force against China.

What it really costs in the bill for a container

Below are our data with reading dates and rates checked directly in the EU customs tariff. This is the full set of figures on which the calculation that follows is based.

What it really costs in the bill for a container
ItemValueDate
Freight for a 40-foot container, Drewry WCI index4,526 USD per 40-foot containerreading of 20 August 2026
NBP mid rate3.6852 PLN per 1 USD26 August 2026
Anti-dumping duty on ceramics from China79.0 per centin force since 7 February 2026
Import duty, porcelain, TARIC code 6911 10 00 9012.00 per centtariff checked 26 August 2026
Import duty, stoneware, TARIC code 6912 00 23 105.50 per centtariff checked 26 August 2026

Let us take a typical order that beginners ask about: ten thousand porcelain mugs at 80 cents FOB, so goods worth eight thousand dollars. Let us add freight and port charges. The customs value comes to around twelve thousand dollars, because transport to the EU border is included in the price of the goods.

On that value, the authority will charge 12 per cent import duty and 79 per cent anti-dumping duty. Together 91 per cent, so almost eleven thousand dollars. Then VAT at 23 per cent is calculated not on the value of the goods but on the customs value increased by both duties, which adds another five and a half thousand. At clearance you therefore leave around sixteen thousand dollars for goods worth eight thousand. You will recover the VAT if you are an active VAT payer, but you will never get the duty back: it is a cost that is permanently built into the price of the mug. We set out the calculation mechanics in more detail in the article on customs duty and VAT when importing from China, and we update current freight rates on the freight quotations page.

The conclusion is uncomfortable but simple. With such a burden, Chinese ceramic tableware stops competing on price with Portuguese, Turkish or Polish production. That was exactly the aim of these measures, and it has been achieved.

Is your product definitely covered

The scope of the measure is defined by CN codes with the prefix ex: 6911 10 00, 6912 00 21, 6912 00 23, 6912 00 25 and 6912 00 29. In practice this means all tableware and kitchenware, regardless of whether we are talking about porcelain, stoneware or earthenware. A mug, plate, bowl, jug, salad bowl and ovenproof dish fall here without exception.

There is, however, a narrow list of exclusions, introduced back in 2017 and maintained to this day. Outside the scope of the measure are spice grinders with their ceramic grinding parts, coffee grinders, knife sharpeners, ceramic sharpeners, ceramic kitchen tools used for cutting, grinding, grating, slicing, scraping and peeling, and cordierite ceramic stones for baking pizza or bread. These goods have their own code in the tariff and do not pay anti-dumping duty.

Watch out for one classification trap, because it can change the bill. Porcelain and china goods are in heading 6911 and have a 12 per cent import duty, whereas stoneware and earthenware sit in heading 6912, where import duty is 5.50 per cent. The anti-dumping duty is identical in both cases, but the difference in the basic duty is six and a half percentage points. If you are not sure which heading your goods fall under, check before ordering, not after. We show this step by step in the guide to importing from China.

Food contact documents you must demand

Customs duty is one matter, compliance is another, and they do not replace each other. A mug is an article intended to come into contact with food, so you are responsible for it as the importer, even if the factory sent a file with stamps. Below is the full set you should ask for before paying the deposit, not after loading.

  • A declaration of compliance under Regulation 1935/2004 and Directive 84/500/EEC as amended by Directive 2005/31/EC. It must contain the details of the manufacturer and the importer, unambiguous identification of the article, the date of issue and confirmation that the limits are met.
  • A test report on lead and cadmium migration according to standard EN ISO 6486, from an accredited laboratory, carried out on a sample with your glaze and your decoration.
  • A statement on good manufacturing practice under Regulation 2023/2006.
  • A material specification: body composition, firing temperature, confirmation that the glaze is lead-free, and declared dishwasher and microwave resistance.
  • Technical documentation and a risk assessment required by the General Product Safety Regulation, which you keep for ten years.

The limits the report refers to are set in three categories. A mug belongs to category two, fillable articles with a depth of more than 25 millimetres, and the values of 4.0 milligrams of lead and 0.3 milligrams of cadmium per litre apply to it. A plate and saucer, as flat articles, fall into category one with limits of 0.8 milligrams of lead and 0.07 milligrams of cadmium per square decimetre. Cooking ware and containers over three litres form category three, with limits of 1.5 milligrams of lead and 0.1 milligrams of cadmium per litre.

Separately, a word on the most common false lead. A Chinese supplier usually sends a report marked LFGB. That is German law, not EU law, and in itself it is not a mistake, because it is sometimes issued more broadly than the directive requires. But check two things: whether the report actually tests lead and cadmium using the EN ISO 6486 method, and whether it concerns the same design you are ordering. A report from three years ago on a different decoration protects you to no degree at all.

Markings on the mug and on the packaging

The article or the packaging should carry the glass and fork symbol or wording stating that it is intended for food contact. Formally, the rule allows this marking to be omitted when the purpose of the article is obvious from its nature, and a mug is an obvious case. In practice, however, the symbol costs nothing and closes the discussion with inspectors and with sales platforms, so just order it. The carton and filler, in turn, are subject to separate rules, namely the importer's packaging obligations under PPWR.

What must appear, however, is the name and address of the responsible operator established in the EU, meaning your details as the importer. This requirement follows in parallel from the food contact materials rules and from the general product safety rules. The latter also require the name and address of the manufacturer and an element allowing the product to be identified, for example a batch or serial number. The batch number also serves the traceability function that is expressly required for food contact materials.

Two things people ask about that are not mandatory. First, the EU has no general obligation to put the country of origin on non-food products, so wording about Chinese origin is not legally required. If you do declare it, however, it must be true, and retail chains and marketplaces usually write such a requirement into the contract themselves. Second, tableware is not subject to CE marking, and such a mark has no legal basis on it. A supplier offering a CE certificate for mugs shows by that alone that it does not understand what it is selling.

Finally, a practice you will not find stated in the directive, but which saves batches of goods. Do not order decoration in a band of about twenty millimetres from the rim of the vessel, that is in the lip contact zone. On-glaze colours applied on top are the main source of lead and cadmium exceedances, and inspections in Germany and France check this zone separately.

Frequently asked questions

Is "new bone china" subject to anti-dumping duty? Yes. The trade name describes the body recipe, not the customs category. The article goes into heading 6911 and is subject to the 79.0 per cent rate in the same way as ordinary porcelain.

Can you still get a lower rate today through the right supplier? No. Since 7 February 2026 a single rate applies to the whole of China, and it does not depend on whom you trade with. The earlier additional codes assigned to factories have lost their meaning.

Does importing ceramics from Vietnam or Turkey avoid this duty? Yes, provided the goods were genuinely made there. The measure concerns origin, not the place of loading. Transhipping Chinese goods through a third country and swapping the label is customs fraud, and the Commission has already run an anti-circumvention proceeding on this.

Do I need a declaration of compliance if I only sell online? Yes. The obligation concerns placing the article on the market, not the sales channel. The declaration must accompany the goods at marketing stages other than retail, and you must be able to produce it at the authority's request.

Is an LFGB report from the supplier enough? On its own it does not settle the matter. What counts is whether the test covered lead and cadmium migration according to the applicable standard and whether it concerns the design ordered. Without that it is a nice document with no evidential value.

Sources