Retroactive anti-dumping duty: 0% today, a back payment may come later

Import registration means that at clearance you pay 0% anti-dumping duty, but the customs office records your declaration, and the European Commission may later impose a definitive duty on these goods too. The limit is firm: at most 90 days before the day the provisional duty took effect, never before the investigation was initiated and only for registered imports (Article 10(4) of Regulation (EU) 2016/1036). The same 90-day rule appears in Articles 10.6 and 10.8 of the WTO Anti-Dumping Agreement, so it is not an EU invention but a standard of world trade.

For steel shelving from China the clock is already ticking. The Commission initiated the investigation on 10.06.2026, and by Implementing Regulation (EU) 2026/2023 made imports subject to registration from 12.09.2026. If the provisional duty comes in on the original timetable around 10.01.2027, the definitive duty may cover shelving cleared from as early as 12.10.2026. A container sailing from Ningbo today therefore falls within this window. This does not mean a back payment will certainly come: the Commission decides on collecting retroactive duty only in the regulation imposing definitive duties.

An importer and an accountant at a desk looking at a sheet with five coloured stages of the proceedings, a shelving beam lying beside them and port cranes visible through the windowAI image
An importer and an accountant at a desk looking at a sheet with five coloured stages of the proceedings, a shelving beam lying beside them and port cranes visible through the window

What import registration is and who decides on it

Registration is introduced by the Commission under Article 14(5) of the basic Regulation 2016/1036. The instruction goes to all customs offices in the EU: every declaration of goods covered by the case is to be marked so that it can be returned to later. Registration can start at the request of EU industry or on the Commission's own initiative. In the shelving case it was the latter: recital 6 of Regulation 2026/2023 states plainly that the Commission decided on its own initiative and will assess the conditions for retroactive collection of duties in any regulation imposing definitive duties.

The registration obligation lasts at most nine months. This is laid down in Article 14(5), and the same is written in Article 1(2) of Regulation 2026/2023, so for shelving registration expires at the latest on 12.06.2027. It also ends earlier if the Commission imposes a provisional duty and considers that further registration is not needed. That is what happened in the case of silicon-manganese steel welding wire: registration from February 2026 was discontinued by Regulation 2026/1929, which imposed a provisional duty in August 2026, and the Commission recorded that at this stage it had not taken a decision on retroactive duties.

Registration changes nothing in the clearance itself. The customs agency lodges the declaration as usual, and the anti-dumping duty field shows zero. The difference lies in what you cannot see: your container is on the list, and the amount of any duty will be calculated later, at a rate nobody yet knows.

When the Commission may collect retroactive duty: four conditions

Article 10(4) of Regulation 2016/1036 allows a definitive duty to be imposed on goods released for free circulation not earlier than 90 days before the application of provisional measures, but not before the initiation of the investigation. All four conditions must be met at once:

  • the imports have been registered in accordance with Article 14(5),
  • importers have been given the opportunity to comment,
  • there is a history of dumping for the product, or the importer was aware or should have been aware of the dumping and the injury,
  • in addition to the imports that caused the injury, imports continue to rise substantially and may undermine the effect of the future duty.

In practice the last condition is the most important. The Commission checks whether, after the case was opened, importers started bringing in goods to stock up and beat the duty. If registration data show a jump in volume, the argument for retroactive duty is strong. If imports fell or stood still, the Commission usually refrains: that was the case with electric bicycles from China, where Article 3 of Regulation 2019/73 ended registration and expressly excluded definitive retroactive duty.

The importer awareness condition is easier to meet than it seems. The notice of initiation is public, and the EU industry's complaint estimates the dumping margin. Anyone ordering shelving after 10.06.2026 will find it hard to claim they had not heard of the case.

Steel shelving from China: the timeline of the case step by step

The case has number AD755 in the Commission's TRON database. The complaint was lodged on 27 April 2026 by the committee of European manufacturers of metal shelving, representing more than 25% of EU production. The product covered by the case is bolted and boltless steel shelving and its parts (uprights and beams), currently under CN codes ex 9403 20 80 and ex 9403 99 10, that is TARIC 9403 20 80 20 and 9403 99 10 20.

The dates follow from the rules, not from our predictions. Article 7(1) of the basic Regulation says that a provisional duty is imposed, as a rule, no later than seven months from initiation, and in any event no later than eight. The notice of initiation C/2026/3097 repeats this explicitly and adds that the investigation is concluded within a year, at the latest 14 months from publication. Hence the dates on the timeline: provisional duty in principle by 10.01.2027, at the latest by 10.02.2027; definitive duty in principle by 10.06.2027, at the latest by 10.08.2027.

Timeline of the steel shelving case from China: initiation, registration, provisional duty, definitive duty and the 90-day retroactivity window
Timeline of the steel shelving case from China: initiation, registration, provisional duty, definitive duty and the 90-day retroactivity window

You calculate the retroactivity window from the day the provisional duty takes effect, going back 90 days. With a duty from 10.01.2027 the window starts on 12.10.2026; with a duty from 10.02.2027 it starts on 12.11.2026. In both cases it cannot reach before 12.09.2026, because earlier imports were not registered. Finally, the definitive duty may also cover the provisional duty period itself: then the security lodged at clearance is collected and any excess released.

The complaint estimates the dumping margin at 62% to 103% of value, but these are EU industry figures, not the duty rate. Recital 10 of Regulation 2026/2023 states that the Commission is not in a position to estimate the future amount. You will learn the rate only from the provisional duty regulation, and until then treat it as an unknown with a high ceiling.

How the authority adds duty after clearance

A customs debt on release for free circulation arises at the moment the declaration is accepted (Article 77(2) of the Union Customs Code, Regulation (EU) No 952/2013). The debtor is the declarant, and with indirect representation also the company on whose behalf the agency lodged the declaration. In practice this means that the back payment will be paid by the importer, not by a customs agency acting in direct representation.

When the definitive duty covers registered imports, the authority returns to your declaration and issues a decision on the additional amount of duty. It has time to do so: a customs debt can no longer be notified to the debtor only after three years from its incurrence (Article 103(1) of the Code), and where the act is subject to criminal proceedings this period grows to five or even ten years. For shelving cleared in November 2026 the authority thus has a margin until November 2029, which comfortably covers the whole investigation calendar.

By then the goods have usually been sold at a price that did not allow for duty. That is the real cost of registration: not the duty itself, but the fact that you pay it after the event out of a margin that no longer exists.

Table: cases under import registration in our register

Below are all published cases with an import registration stage in the ImportPanel register. We read the registration dates from the regulations on EUR-Lex, and the obligation expires at the latest nine months after entry into force (seven for lysine).

Table: cases under import registration in our register
ProductInitiationRegistration fromExpires at the latestReading dateSource
Bolted and boltless steel shelving and racks10.06.202612.09.202612.06.2027reading 2026-10-07Regulation 2026/2023
Welded steel mesh (also Turkey)03.06.202612.09.202612.06.2027reading 2026-10-07Regulation 2026/2022
Alkaline manganese dioxide cells and batteries02.07.202616.09.202616.06.2027reading 2026-10-07Regulation 2026/2049
Glass microspheres16.07.202601.10.202601.07.2027reading 2026-10-07Regulation 2026/2162
Lysine30.04.202630.07.2026end of February 2027reading 2026-10-07Regulation 2026/1824
Glass fibre mesh fabrics (circumvention via Kosovo, Moldova, North Macedonia, Serbia)08.08.202608.08.202608.05.2027reading 2026-10-07Regulation 2026/1925
Copper tubes (also Mexico, Vietnam, Uzbekistan)12.03.202627.05.202627.02.2027reading 2026-10-07Regulation 2026/1161
Acrylate esters (also Saudi Arabia, South Africa, USA)12.03.202622.05.202622.02.2027reading 2026-10-07Regulation 2026/1085
Mobile cranes19.12.202528.02.202628.11.2026reading 2026-10-07Regulation 2026/441
Silicon-manganese steel welding wire11.12.202511.02.2026discontinued 2026/1929reading 2026-10-07Regulations 2026/297 and 2026/1929
Lightweight thermal paper (anti-subsidy case)07.11.202510.02.202610.11.2026reading 2026-10-07Regulation 2026/313
Robotic lawn mowers19.11.202524.01.202624.10.2026reading 2026-10-07Regulation 2026/142

Twelve cases, of which four with registration from September 2026 concern goods that often travel in the containers of small importers: shelving, mesh, batteries and microspheres. We have two more entries with this stage in the database that are awaiting verification at source, which is why we do not show them here. You can check the current state of each case in the register of anti-dumping duties, where for shelving we also link the stages of the same case on the product page for steel shelving and racks.

What to do if your goods are under registration

Start with the code. Registration concerns the ten-digit TARIC code and the product description, not just the trade name. With shelving, the key elements are uprights with two flat connecting surfaces and beams without welded connecting elements, so not every shelving unit from China falls within the scope. How to establish the code before ordering is described in our article on how to check the CN code of goods.

Then work out the scenario with duty. Include in your calculation a reserve for the definitive duty for every delivery whose clearance falls within the possible retroactivity window, and do not spend this reserve on discounts. If there is no retroactive duty, the reserve returns to the margin. If there is, you have the means to pay the authority's decision without a hole in your cash flow.

The third thing is the contract with the supplier. Include a clause that the supplier covers or shares with you any anti-dumping duty collected retroactively on deliveries from the registration period, and ask for the producer's name as it would appear if the Commission granted it an individual rate. Producers cooperating in the investigation often get their own, lower rates in the regulation than the others, so ask your supplier whether the factory has come forward in the case. The last thing is monitoring: cases change stage from one day to the next, and you will learn about the provisional duty from the Official Journal of the EU. If you would rather hand this piece of risk to someone who follows the cases daily, see how import to order from China works.

Checklist before ordering goods under registration

  • Check in the ImportPanel register whether your product has an import registration stage.
  • Compare the TARIC code and product description with Article 1 of the registration regulation.
  • Work out the clearance date of the container and compare it with the possible retroactivity window.
  • Reserve an amount in your calculation for the definitive duty on deliveries in this window.
  • Include in the contract with the supplier a clause on sharing retroactively collected duty.
  • Ask the supplier about the producer and the factory's participation in the Commission's investigation.
  • Follow the date of the provisional duty, because the 90 days are counted back from it.

Frequently asked questions

Does import registration mean I will pay anti-dumping duty?

No. Registration only makes it possible to collect duty retroactively, and the Commission decides on this only in the regulation on definitive duties. It must also demonstrate, among other things, a further substantial rise in imports after the case was opened. In the case of electric bicycles from China, registration was ended without retroactive duty, so the outcome is not a foregone conclusion.

How far back can anti-dumping duty reach at most?

At most 90 days before the day the provisional duty takes effect. Nor can it reach before the initiation of the investigation or before the start of registration. For steel shelving from China this means goods cleared at the earliest from 12.09.2026, and realistically from 12.10.2026, if the provisional duty comes in around 10.01.2027.

Who will pay retroactively collected duty: the importer or the customs agency?

Usually the importer. The debtor is the declarant, and with indirect representation also the company on whose behalf the declaration was lodged. An agency acting in direct representation only lodges the documents in your name. That is why the reserve for duty is kept in the importer's calculation, not the agency's.

How long can the authority claim a back payment of duty?

Three years from the incurrence of the customs debt, that is from acceptance of the declaration. This is laid down in Article 103 of the Union Customs Code. Where the act is subject to criminal proceedings the period grows to five or ten years. For shelving cleared in November 2026 the authority has until November 2029.

Where can I check whether my product is subject to registration?

In the Commission implementing regulation on registration, in the Official Journal of the EU, and in the TARIC tariff. We keep a daily overview of cases in the ImportPanel register, where for each product we show the stage, the CN codes and the related stages of the same case. Before clearance, always confirm the scope in the text of the act.

Sources