How importing under your own brand differs from an ordinary purchase of goods
Importing private label means you have goods made in a factory in China but sell them under your brand, with your own packaging and markings. The factory is not responsible for the product's compliance with EU rules; you as the importer become the responsible operator within the meaning of product safety law. The same goods brought in as a finished product of someone else's brand carry a different division of responsibility than when it is your logo that goes on the label. The general process of clearance and documents is described in the guide to importing from China step by step; here we focus only on what is specific to private label.

MOQ: how many units you must order and how to negotiate it
The minimum order quantity (MOQ) depends on the product category, the degree of customisation and whether the factory already has a ready mould or must order one for your design. The more you change compared with the standard product from the factory's catalogue, the higher the MOQ, because the supplier passes the cost of starting production on to you. When negotiating MOQ, it is worth separating the conversation about the unit price from the conversation about the starting volume: factories are more willing to lower the entry threshold than the price per unit, because it does not affect their percentage margin. Before you set the target volume, check the container break-even point in the LCL versus FCL comparison, because an MOQ set without reference to container capacity often ends with paying for unused space.
Samples before the production order
A pre-production sample is the only way to verify quality before you order a commercial batch, and it should reach you physically, not just as a photo in a messaging app. It is worth ordering several sample variants: one from the factory's catalogue as a reference point and another already with your modifications (colour, print, packaging). Samples usually travel by air courier, so their transport cost is counted in tens of dollars per kilogram, not in container rates, which is why you should not compare this cost with sea freight. Only the approved reference sample should be attached to the contract as an annex, in case of a dispute over the conformity of the production batch.
Mandatory markings: CE, barcode, importer details
As a private label importer you are responsible for ensuring the product has the full set of markings required in the EU, including CE marking where the category requires it, and the details of the responsible operator on the packaging. The factory in China will put on the product what you instruct it to, but verifying that the technical documentation matches the actual design of the product lies on your side. A separate category of obligations is the packaging requirements under PPWR, which start applying to importers in stages and are worth planning already at the stage of designing the private label packaging, as described in the guide to the importer's obligations under PPWR. An error in the markings usually only comes to light during market surveillance, when the batch has already been sold, and correcting markings on goods already produced is much more expensive than a fix at the design stage.
CN code and customs duty: why private label does not change the rate
Giving a product your own brand does not affect its customs classification: the CN code is determined by the actual design, material and purpose of the goods, not the logo on the packaging. If you import a category covered by an anti-dumping proceeding, for example ceramics or certain industrial products, the anti-dumping duty applies to you in the same way as to an importer of goods under someone else's brand. Checking the correct code before placing the production order is described in the guide to CN classification, and you will find the current status of proceedings against specific categories in the database of anti-dumping duties on goods from China. It is worth doing this before, not after, signing the contract with the factory, because changing the product specification to fit a different code is often easier at the sample stage than after the batch has been produced.
Product liability: what you take on together with the brand
By putting your brand on a product, you take on the manufacturer's liability within the meaning of the rules on liability for defective products, even if you did not physically make the goods. This means an obligation to keep the technical documentation, declaration of conformity and test results for the whole period in which the product may be the subject of a complaint. In the event of an accident caused by a product defect, it is your details as the responsible operator that appear on the packaging, not the details of the factory in China, so the contract with the supplier should contain a clause on recourse for costs in the event of a factory defect. This element of the contract is often omitted with a first private label order, and its absence means you bear the cost of a defective batch yourself, without the possibility of recovering it from the manufacturer.
Freight and exchange rate: how they affect the private label unit price calculation
With private label you often order smaller batches than with wholesale imports of finished products, which changes the economics of choosing between sea, rail and air. Current quotations are worth checking regularly in the overview of freight indices from China, because differences between routes can be large over a short time. The table below shows the latest readings of the main indices, which are worth comparing with a freight forwarder's offer when planning the transport cost of the starting batch.
| Index | Latest reading | Unit | Reading date | Source |
|---|---|---|---|---|
| Drewry WCI (sea freight, 40-foot container) | 4,500 | USD per 40-foot container | reading 2026-09-17 | Drewry World Container Index |
| SCFI (sea freight from Shanghai) | 3,687.83 | index points | reading 2026-09-18 | Shanghai Shipping Exchange |
| ERAI (China-Europe rail freight) | 4,082 | USD per FEU | reading 2026-09-16 | Eurasian Rail Alliance Index |
| Drewry East-West Air Freight Index | 3.91 | USD per kilogram | reading 2026-08-31 | Drewry East-West Air Freight Index |
| USD/PLN rate, table A | 3.7998 | PLN per 1 USD | reading 2026-09-18 | NBP, table A |
To convert an offer in dollars into zloty, use the rate from the table, not the rate on the date the proforma invoice was issued, because the difference can change the margin calculation for a small starting batch. You can check specific freight forwarder offers for a given route and volume on the ImportPanel freight board, where spot rates are often clearly different from what the index alone suggests.
Checklist: importing a private brand from China
- You established the product's CN code before negotiating the specification with the factory
- You checked whether the product category is subject to an anti-dumping proceeding
- You ordered a reference sample and a sample with your modifications, both physically verified
- The contract with the factory contains a clause on liability for factory defects and recourse for costs
- You planned the CE marking and the details of the responsible operator on the packaging
- You checked the packaging obligations under PPWR for your product category
- You compared current freight rates with the freight forwarder's offer before setting the MOQ
- You secured the technical documentation and declaration of conformity for safekeeping
Frequently asked questions
Can I change the MOQ after the sample has been approved?
Yes, but changing the volume after the sample is approved can affect the unit price, because the factory calculated it for a specific batch size. If you plan to increase the order in later cycles, write it into the contract straight away as an option for future batches at the same price, instead of renegotiating the terms from scratch with each new order.
Who is liable for a defect in a product sold under my brand?
Formally, you are, as the operator responsible towards the consumer in the European Union, regardless of the fact that the product was made by a factory in China. The possibility of recovering costs from the manufacturer depends solely on the provisions of your commercial contract, which is why the clause on liability for factory defects should be negotiated before the production order is placed, not after a complaint.
Do I have to have the factory apply the CE marking, or do I do it myself?
The factory can put the physical marking on the product, but conformity assessment and preparation of the technical documentation remain your obligation as the importer. In practice this means you have to verify whether the tests and certificates supplied by the factory actually meet the EU requirements for the given product category before the marking goes on the packaging.
How to choose transport for a small private label starting batch
With a first private label batch, the volume is often too small for a full container, so it is worth comparing LCL, rail and air transport in terms of time and cost per unit of goods. The decision is made easier by the overview of current freight indices in the guide to transport from China to Poland and by specific freight forwarder offers checked before deciding.
Do I have to register my own brand before importing?
Legally it is not a condition for customs clearance, but not registering the trade mark exposes you to the risk that someone else registers an identical name first, blocking you from selling under that brand on the EU market. Registration is worth carrying out in parallel with the sample stage, before you order packaging with the final logo in a larger print run.
