Three different deadlines, not one spread out in instalments

Regulation (EU) 2023/1542, known as the Battery Regulation, imposes three separate obligations on an importer of goods with a built-in battery, and most guides merge them into one. Separating them is the most important thing here, because each has a different deadline, a different legal basis and a completely different implementation cost.

The separate collection symbol on every battery has applied since 18 August 2025, so for almost a year. It is an ordinary print.

The label with general information and capacity was supposed to take effect on 18 August 2026. That deadline is conditional, and it is what this article is about.

The QR code on the battery and a battery removable by the user take effect on 18 February 2027. That deadline is unconditional and is also the most expensive to implement, because the second of these obligations means a change to the housing design at the supplier, not a new print.

Why 18 August 2026 will not apply

Article 13 of the regulation sets the deadline conditionally. The label obligation applies from 18 August 2026 or 18 months after the entry into force of the implementing act referred to in paragraph 10 of that article, whichever of these dates is later.

That implementing act is to define the thing without which the label cannot be designed: the official template, meaning the layout of the fields, their order, the capacity unit and the notation format. The Commission was supposed to adopt it by 18 August 2025.

It did not. The draft act was published for public consultation on 15 December 2025, feedback closed in January 2026, and industry organisations were still submitting positions on 26 January 2026. We checked the status on 28 July 2026: the act remains a draft and has not been published in the Official Journal of the European Union.

Since the act does not exist, the mechanism in Article 13 works on its own. The later of the two dates is not 18 August 2026 but 18 months counted from the entry into force of an act that does not yet exist. So the label obligation cannot take effect in August 2026.

A caveat that has to be stated honestly: this is a reading of the provision, not a Commission announcement postponing the deadline. No such announcement exists and there probably will not be one, because the postponement is written into the provision itself. Before you make a purchasing decision, check in EUR-Lex whether the implementing act has been published since this article was written. If it has, your deadline is the date of its entry into force plus 18 months.

What this means in practice

Do not order a print run of labels for August 2026. The official template is still being drafted, and a run printed to the draft may end up in the bin after changes made following the consultation.

But have the design ready. There will be only 18 months between adoption of the act and the obligation taking effect, and that window also has to fit collecting data from the factory and retooling the line. Four of the ten items required on the label are information that Chinese factories do not provide of their own accord: the exact location of the manufacturing plant, hazardous substances other than mercury, cadmium and lead, the extinguishing agent appropriate to the chemistry, and critical raw materials above 0.1 per cent by weight. You have to ask for these four things directly when ordering, because without them the label cannot be put together.

The postponement does not affect anything else. The crossed-out bin symbol has applied since 18 August 2025, the Cd and Pb symbols apply, and the QR code and battery removability take effect on 18 February 2027 unconditionally.

What already applies today and is cheapest to fix

Poland has not yet passed a law implementing the Battery Regulation. Until then, the Act of 24 April 2009 on batteries and accumulators applies, and among other things it requires that the device comes with Polish-language instructions for removing the battery. The penalty provided for in that act is from 2,000 to 150,000 zloty, imposed by the regional environmental protection inspector.

It is one page of text in the user manual, and the risk is real and applies to every delivery, including one that is already sitting in the warehouse. If you were to do only one thing from the whole list this week, do this.

The symbol on a battery is not the symbol from the device

The most common mistake at this stage is taking the crossed-out bin symbol from electronic equipment and putting it on the battery. They are two different symbols.

The waste electronic equipment symbol under standard EN 50419 has a horizontal bar under the bin, indicating placing on the market after 13 August 2005. The battery symbol from Annex VI Part B to the regulation has no bar. A factory that only receives the instruction "add the bin symbol" will print the wrong one in half of cases.

The size of the symbol on the battery is set by Article 13 paragraph 4 and leaves no room for interpretation: at least 3 per cent of the area of the largest side of the battery for a battery pack, at least 1.5 per cent for cylindrical cells, in both cases no more than 5 by 5 cm. If the symbol would come out smaller than 0.47 by 0.47 cm, it does not have to be on the battery and is printed on the packaging instead, measuring at least 1 by 1 cm.

Capacity is stated in mAh, never in Wh

The Battery Regulation itself gives neither the unit, nor the measurement method, nor the format of the marking, because it leaves that precisely to the missing implementing act. Until August 2026, however, the older regime of Commission Regulation (EU) No 1103/2010 applies, and it is specific: rated capacity is stated in mAh or Ah, measured according to standard IEC/EN 61960, and never in watt-hours. A value in Wh can be added as transport information, but it is not a capacity label.

The format is also defined: a whole number for mAh, one decimal place for Ah. The capacity label is separate from the general information label and is placed on the outer housing of the pack, not on the individual cells inside.

Our regulatory calendar: what else is coming

The Battery Regulation is not the only thing shifting under an importer's feet. This is an extract from the calendar we keep for client panel users:

Our regulatory calendar: what else is coming
DateObligationStatus
18.08.2025separate collection symbol on every batteryapplies
12.08.2026Packaging and Packaging Waste Regulation (PPWR)deadline fixed
18.08.2026battery label: general information and capacitydeadline postponed, described above
18.02.2027batteries: QR code and battery removable by the userunconditional deadline
14.12.2027ban on products made with forced labourdeadline fixed

We set out the obligations from the second row of the table in our article on what PPWR changes for importers of packaging. If, besides electronics, you import steel or aluminium products, also check CBAM certificates for importers, because that obligation has its own calendar.

The last item on this list starts to affect importers sooner than the date suggests. On 24 July 2026 the US trade authority imposed additional duties on 60 economies precisely over forced labour, and the EU is moving in the same direction by its own route. We described this in our article on US duties on Vietnam. The full calendar, with ongoing market commentary, is in the China import radar.

Frequently asked questions about the battery label

Do I need a label for deliveries received in August 2026? No, if the Commission implementing act has still not been published. The separate collection symbol and the Polish-language battery removal instructions continue to apply unchanged, however.

Does the postponement also cover the QR code? No. The QR code takes effect on 18 February 2027 and that deadline is not conditional on anything.

Does this really apply to ordinary consumer electronics? Yes, if the product has a built-in battery. It is worth not confusing this with the battery passport, which covers only industrial batteries above 2 kWh, light means of transport batteries and electric vehicle batteries.

Can I state the capacity in Wh? Not as the capacity label. mAh or Ah are required. A value in Wh can be added alongside as transport information.

Who is responsible, the factory or me? The importer. You place the product on the EU market, so your details must be on the battery alongside the manufacturer's, and responsibility for compliance rests with you. We have collected the other obligations of a company that imports goods from outside the EU itself in the article importing from China for businesses: EORI, VAT, invoice and contract.

What about a removable battery if our devices are glued? From 18 February 2027 the battery must be removable using ordinary tools, without hot-melt gluing and without permanent soldering, and spare parts must be available for five years. That is a design change, meaning new moulds at the supplier and a real cost, which is why the conversation with the factory has to start now, not in 2027.

What to do this month

First, check the user manuals of the goods you have in stock for a Polish-language description of how to remove the battery. It is an obligation that applies today and the cheapest to fix.

Second, with your next order, ask the supplier for the four pieces of information it will not provide on its own: the location of the manufacturing plant, hazardous substances, the extinguishing agent and critical raw materials above 0.1 per cent by weight. Without them you will not be able to design the label once the template appears.

Third, ask about the housing design with February 2027 in mind. It is the only item on this list that requires a tooling change, and so the only one where delay really costs money.

Sources

  • Regulation (EU) 2023/1542 of the European Parliament and of the Council concerning batteries and waste batteries, in particular Article 11, Article 13 and Annex VI
  • Commission Regulation (EU) No 1103/2010 establishing rules as regards capacity labelling of batteries
  • Draft Commission implementing act on battery labelling, public consultation opened 15.12.2025
  • Act of 24 April 2009 on batteries and accumulators
  • Regulatory calendar: ImportPanel's own database, status as of 28.07.2026