Pre-shipment quality inspection in China: when and why

A quality inspection in China is ordered when at least 80 per cent of the batch has been produced and packed, and before the final instalment is paid and the container is loaded. Only then does the inspector draw cartons at random from finished goods, and you still have leverage in hand: the unpaid balance. Once the vessel has sailed, a defect becomes your problem, because the cost of returning the goods to the factory is usually higher than the value of the corrections.

A pre-shipment inspection, PSI for short, is not a courtesy visit. The inspector draws a sample according to ISO 2859-1, compares the goods with the specification and the golden sample, checks the packaging, markings and carton dimensions, and finally issues a report with a verdict: compliant, non-compliant or for the buyer's decision. This article describes market practice and the standard, not legal requirements: the law does not require an inspection, but the importer is responsible for a defective product on the EU market.

Two inspectors carry out a drop test on a sealed export carton in a bright quality control room, with a reference sample under a transparent cover beside themAI image
Two inspectors carry out a drop test on a sealed export carton in a bright quality control room, with a reference sample under a transparent cover beside them

Types of inspection: from raw materials to container loading

The pre-shipment inspection is the most popular, but not the only one. With a first order at a new factory, an inspection during production pays off when 20 to 30 per cent of the units are finished. Then a recurring defect, for example a badly sewn zip or the wrong plastic colour, comes to light before the factory turns it into the whole run. For products made from expensive raw materials, a pre-production inspection is added: checking materials, colours and components before they go onto the line.

The last stage is loading supervision. The inspector counts the cartons, checks that the same batch he inspected goes into the container, and that the container is dry, clean and without holes. This makes sense for goods that are easy to swap and with a supplier you do not yet know. With a regular, proven supplier, many companies settle for a pre-shipment inspection and a random check every few batches.

Before you order any inspection, check the factory itself. A factory audit answers the question of whether the company is a manufacturer at all and whether it has the conditions to make your order, while an inspection answers the question of whether a specific batch is fit for sale. They are two different tools, and one does not replace the other. We describe the sequence of the whole purchase in the guide importing from China step by step.

AQL and ISO 2859-1: how many units the inspector will open

AQL, the acceptable quality limit, is not the percentage of defects you accept in a batch. It is a parameter of the sampling plan from ISO 2859-1: it says how many units the inspector must check and at how many defects the batch still passes. The most common set in importing consumer goods is general inspection level II, zero tolerance for critical defects, AQL 2.5 for major defects and AQL 4.0 for minor defects. You write these values into the order, rather than agreeing them with the inspector on site.

The sample size depends on the batch size. For a batch of 3,201 to 10,000 units the standard assigns code letter L and a sample of 200 units. At AQL 2.5 the batch passes when the inspector finds at most 10 major defects, and fails at 11. At AQL 4.0 for minor defects the limit is 14 and 15. Smaller batches have smaller samples: 1,201 to 3,200 units means 125 units, 501 to 1,200 units means 80 units.

A critical defect is one that may endanger health or breaks the law: a sharp edge on a toy, missing CE marking where it is required, an exposed wire. One such unit in the sample means the batch is rejected, regardless of AQL. A major defect reduces usability or leads to returns, for example a zip that does not work. A minor one is cosmetic, which the customer usually will not notice. Dividing defects into these three groups for your product is the most important entry in the inspection checklist.

Golden sample and specification: what the inspector compares the goods with

The inspector does not know what product you ordered until you show it. The golden sample is a unit approved by you before production, sealed and signed, against which the batch is compared. Keep one unit yourself and leave the second at the factory in a sealed bag. Without it, a dispute about a colour shade or material thickness ends as your word against theirs.

The specification is the other half of the agreement. Write into it the dimensions with tolerances, the material, the colour according to a colour standard, the net weight, the method of packing a single unit, the number of units per carton, the dimensions and weight of the master carton and the marking in Polish. For goods under your own brand, conformity of the print with the approved design is added, which we write about in the article on importing from China under your own brand. Any point not in the specification may be deemed compliant by the inspector.

Attach a list of on-site tests to the specification. Typical ones are a carton drop test from a specified height, checking every function on the sample, an odour and moisture test, weighing the carton and reading the barcode with a scanner. The inspector cannot do laboratory tests on the factory floor, for example for lead or phthalate content: he takes samples to a laboratory, and the result arrives after a few days.

Table: sampling plan and the cost of a mistake

Below is the sampling plan from ISO 2859-1 for general inspection level II at typical limits, and our readings that show how much a mistake after loading costs.

Table: sampling plan and the cost of a mistake
ItemValueWhat it meansReading dateSource
Batch of 501 to 1,200 unitssample of 80 unitscode letter Jreading 2026-10-08ISO 2859-1, tables 1 and 2-A
Batch of 1,201 to 3,200 unitssample of 125 unitscode letter Kreading 2026-10-08ISO 2859-1, tables 1 and 2-A
Batch of 3,201 to 10,000 unitssample of 200 unitscode letter Lreading 2026-10-08ISO 2859-1, tables 1 and 2-A
AQL 2.5 with a sample of 200 unitsaccept at 10 defects, reject at 11major defectsreading 2026-10-08ISO 2859-1, table 2-A
AQL 4.0 with a sample of 200 unitsaccept at 14 defects, reject at 15minor defectsreading 2026-10-08ISO 2859-1, table 2-A
Sea freight, 40-foot container4,434 USDcost of one way, without returnreading 2026-10-01Drewry World Container Index
USD/PLN rate3.9132 PLNconversion factor for the final instalmentreading 2026-10-08NBP, table A

The second part of the table explains why you inspect in China rather than in Poland. A 40-foot container cost 4,434 USD one way according to the Drewry index, and sending defective goods back means a second freight, customs duty and clearance that nobody will refund. You can check current freight readings on the freight rates from China page.

The simplest payment arrangement with a factory is a deposit with the order and the balance before shipment. Write into the contract that the second instalment is payable on receipt of an inspection report with a compliant result. Then the inspection has real force: the factory knows that without a positive report it will not get the money, and you do not pay for goods nobody has seen. When transferring the balance in dollars, check the rate on the day of payment, because at a rate of 3.9132 PLN (NBP reading of 8 October 2026) every day of delay changes the cost in zloty.

Set the date in advance. Inspection companies usually need a few working days to assign an inspector, and before Chinese New Year their calendars are full, because everyone wants to ship before the factories close. It is also a period in which factories work in a hurry and more often cut their own checks short, so the risk of defects rises. If you are planning a delivery for early 2027, read our article on orders before Chinese New Year and book the inspection together with the production date.

When the report comes out non-compliant, you have three paths: corrections and a re-inspection at the factory's expense, accepting the batch with a discount for documented defects, or refusing to accept it. Write a re-inspection at the supplier's expense into the contract in advance, because after the fact factories rarely agree to it. Do not accept a promise that defective units will be set aside: without a re-inspection you do not know what went into the container.

External inspector or your own visit

You can choose an inspection company, an independent inspector or a trip of your own. An inspection company provides a standard report with photos, liability insurance and inspectors in most industrial regions of China. An independent inspector can be more flexible, but it is harder to check his impartiality, because nothing stops him earning on the side from the factory. Your own visit makes sense for a first large delivery or for a product whose quality is hard to describe in words, for example the hand of a fabric.

Whichever you choose, do not accept a report prepared by the factory's quality department. The factory has an interest in the batch passing, and even an honest internal inspector will not call you to say his boss should halt the shipment. A report you pay for is a report for you.

Pre-shipment inspection checklist

  • Approve and seal the golden sample before production starts.
  • Write inspection level II and AQL limits for critical, major and minor defects into the order.
  • Draw up a specification with dimensional tolerances, colour, packing and marking in Polish.
  • Agree the list of on-site tests: carton drop, function checks, weight, barcode scans.
  • Book the inspector in advance, especially before Chinese New Year.
  • Make payment of the final instalment conditional on a compliant report.
  • Write into the contract a re-inspection at the factory's expense if the result is non-compliant.
  • With a new supplier, also order supervision of container loading.

Frequently asked questions

When is the best time for a pre-shipment quality inspection?

When at least 80 per cent of the batch is finished and packed, and before the final instalment is paid. Earlier, the inspector has nothing to sample, and after loading you no longer have the leverage of an unpaid amount. With a first order at a new factory, add an inspection during production.

What does AQL 2.5 mean in an inspection report?

It is a sampling plan limit from ISO 2859-1 for major defects, not consent to 2.5 per cent defective units in the batch. For a batch of 3,201 to 10,000 units the inspector checks 200 units and the batch passes when he finds at most 10 major defects.

Is an inspection in China mandatory?

No. No rule requires a pre-shipment inspection for an ordinary import. The importer is, however, responsible for the safety and compliance of the product on the EU market, so the inspection is your tool to avoid selling defective goods that you will pay for with returns, penalties or a market withdrawal.

Can I trust a report from the factory's quality department?

Not as the only evidence. The factory has an interest in the batch passing, and its inspector will not halt a shipment against his boss. Treat the factory's report as additional information, and base the payment decision on the report of an inspector you choose and pay for yourself.

What should I do if the batch fails the inspection?

You have three paths: corrections and a re-inspection at the factory's expense, accepting the batch with a discount for the defects described in the report, or refusing to accept it. It is easiest when a re-inspection at the supplier's expense is written into the contract before production, because after the fact factories rarely agree to it.

Sources

  • ISO 2859-1:1999, Sampling procedures for inspection by attributes, Part 1, table 1 (code letters) and table 2-A (single sampling plan, normal inspection), accessed 8 October 2026.
  • PN-ISO 2859-1, the Polish edition of the standard, Polish Committee for Standardization, and the AQL table and description of pre-shipment inspection (threshold of 80 per cent of the batch finished) in materials from the inspection companies QIMA and SGS, accessed 8 October 2026.
  • Regulation (EU) 2023/988 on general product safety (GPSR), importer obligations, applicable from 13 December 2024.
  • Drewry World Container Index, 40-foot container, reading of 1 October 2026, ImportPanel data.
  • NBP, table A of mid rates, USD/PLN, reading of 8 October 2026, ImportPanel data.