How much a China import service costs: the short answer
The cost of having a company handle an import from China, running the whole process from factory to warehouse, depends on the batch size and on whether a factory still has to be found. In the published Allbag price list (page status confirmed on 2 November 2026), smaller batches counted in a few pallets average 2,000 to 3,000 PLN net, and a full 40HQ container on a new project starts from 5,000 PLN net. On top of that come external costs: goods, freight, customs duty, VAT and insurance.
The amount alone is not enough to compare offers, however. One company charges a fixed fee and settles the rest according to invoices, a second takes a percentage of the value of the goods, and a third shows no fee at all, because it earns on the difference between the factory price and the price you pay. So before you ask about the price, establish the fee model. We describe them below one by one, with figures where they are publicly available.

Three fee models for an import service
The first model is a fixed handling fee. The company sets in advance an amount for the whole order, and passes external costs, that is goods, freight, clearance and port charges, on to the customer at the amounts on the source invoices. The advantage is transparency: you see how much the goods cost at the factory and how much you pay for the work. The disadvantage is that with very small orders the fixed fee is a large percentage of the batch value.
The second model is a percentage commission, typical of buying agents. The agent takes a set percentage of the order value, and you remain the importer, with your own EORI number and responsibility for clearance. The commission grows with the value of the goods, even though the work does not grow proportionally. If your company is going to be the importer, check how to get an EORI number before your first customs declaration.
The third model is a margin hidden in the price of the goods. A trading company buys at the factory and sells you the product with a mark-up, often on DDP terms, that is with delivery and clearance. You do not see the factory price or the freight cost, so it is impossible to judge how much you pay for the service itself. This model can be convenient for a one-off purchase, but it makes negotiating later orders harder.
Ranges from the published price list: from a pallet to a container
The handling fee depends above all on scale and on how much work finding a factory requires. On the import from China to order page, Allbag publishes three levels. Smaller batches, that is a few pallets consolidated with other customers' cargo, average 2,000 to 3,000 PLN net. A full 40HQ container on a new project with sourcing and factory verification starts from 5,000 PLN net.
The second factor is whether the goods are new. When the same product is reordered from a proven supplier, searching for and verifying a factory falls away, so the fee goes down. The page gives an example: the first handling of a container about 6,000 PLN net, and with monthly reorders about 3,000 PLN net. With goods worth 50,000 USD in the container, this means from 1.5 to 3 per cent of their value.
The third factor is scope. Laboratory tests and preparation of compliance documentation, packaging design for your own brand or an on-site factory audit are priced separately, or are included in the price for full containers, like personalisation and branding in this price list. Always ask what exactly the amount covers before you set it against another offer.
What the fee includes and what you pay separately
The handling fee covers the work: sourcing, negotiation, quality control at the factory, organising transport, documents and clearance. It does not cover external costs, which in the fixed-fee model are settled according to source invoices. These include the value of the goods, sea freight with delivery, unloading, customs duty, port charges and any customs examination or container detention.
Freight is a significant variable. The global composite Drewry World Container Index stood at 4,429 USD per 40-foot container (reading of 29 October 2026), while the service page keeps a historical assumption of about 5,500 USD for door-to-door sea transport as at August 2026, including delivery in Poland. These amounts have different dates and scopes, so the difference between them is not evidence of the level of surcharges or margin. The WCI is not a China-Poland quote. For less-than-container loads in this model, freight is shared in proportion to volume: 7 of the container's 67 cubic metres is about 10 per cent of the rate.
Customs duty depends on the classification of the goods and the customs value. VAT is applied at the rate appropriate to the goods, on a base that includes the customs value, the duty due and the required additional costs; in the relevant cases excise duty as well. Cargo insurance in the price list described is mandatory and costs about 1 per cent of the order value. Payments are split into a 30 per cent deposit before the order is carried out and 70 per cent before delivery, usually a week before the vessel enters port. For an indicative comparison of dollar costs, you can use the NBP mid rate of 3.9389 PLN from 2 November 2026. This is not automatically the rate of a bank transfer or the rate applicable to the customs declaration.
Table: handling fee and cost per unit in three variants
The historical examples published on the service page concern the same goods: a household item at 1.50 USD per unit, 500 units per cubic metre, assuming customs duty of 6 per cent and a rate of 3.88 PLN from 1 October 2026. We keep these calculation assumptions and results without recalculating them at the current rate. This is an illustration of the method, not a current offer or a duty rate for any product. The last two rows show separately newer market readings that were not used in the old examples.
| Variant | Handling fee | Total net and cost per unit | Reading date | Source |
|---|---|---|---|---|
| Less-than-container load, 4 m³, 2,000 units | 2,500 PLN | 16,628 PLN, 8.31 PLN per unit | reading 2026-10-08 | Allbag service page |
| Half a 40HQ container, 33 m³, 16,500 units | 5,000 PLN | 118,103 PLN, 7.16 PLN per unit | reading 2026-10-08 | Allbag service page |
| Full 40HQ container, 66 m³, 33,000 units | 6,000 PLN | 228,502 PLN, 6.92 PLN per unit | reading 2026-10-08 | Allbag service page |
| WCI, global composite index, 40-foot container | not applicable | 4,429 USD | reading 2026-10-29 | Drewry World Container Index |
| USD/PLN mid rate, point of comparison | not applicable | 3.9389 PLN | reading 2026-11-02 | NBP, table A |
The factory price in every historical variant is 5.82 PLN per unit. The difference between 8.31 and 6.92 PLN is the effect of scale: with a less-than-container load the handling fee and unloading are spread over 2,000 units, with a full container over 33,000. That is why with a first order it is worth calculating whether it pays to take more goods straight away, also taking stock and financing into account. We describe the components of the calculation in the article what makes up the price of a container from China.
How to compare two import service offers
Bring both offers to the same form: the cost of goods cleared in your warehouse, net, per unit. To the fixed-fee offer add the estimated freight, customs duty, insurance and unloading. To the commission offer also add the cost of your own clearance and time, because you will be the importer. Compare a DDP offer directly, but ask for a breakdown: factory price, freight and fee.
Ask who is listed as the importer. When a Polish company itself buys and imports the goods and then sells them to you domestically, you do not need an EORI number solely because of that domestic purchase. However, an agency merely handling the declaration does not mean it takes over the role of importer of the product. Check the actual purchase chain, the importer's role and your obligations as a distributor. Selling under your own brand or a certain change to the product can give you the obligations of a manufacturer. When you are the importer, a cheaper fee may mean that the risk of a defective batch or a missing declaration of conformity passes to your company. This difference is rarely visible in the amount itself.
Also check when the offer is binding. A reliable quote states the time needed to prepare it (in the price list described, from 1 to 7 working days), the scope and which costs may change, such as freight on the loading date. A detailed description of the process, from specification to the container in the warehouse, is in the article import from China to order: how it works and what it costs.
Checklist before ordering an import service
- Establish the fee model: fixed fee, percentage commission or margin in the price of the goods.
- Ask for the factory price and the source invoices for external costs.
- Check who will be the importer on the customs declaration.
- Ask whether the fee covers sourcing, quality control and compliance documents.
- Calculate the cost per unit for several batch sizes, not just one.
- Verify the payment terms and the moment the risk passes.
- Write into the contract which costs may change after the quote.
Frequently asked questions
How much does handling one container from China cost?
In the published Allbag price list, handling a full 40HQ container on a new project starts from 5,000 PLN net, and on a reorder from a proven supplier it drops to about 3,000 PLN net. On top of the fee come external costs: goods, freight, customs duty, insurance and unloading, settled according to invoices.
Is the service fee based on the value of the goods?
It depends on the model. Buying agents often take a percentage of the order value. In the fixed-fee model the amount does not depend on the price of the goods, but on the scale and scope of the work. With expensive goods a fixed fee is usually more favourable, with very cheap goods and a small order it can be the other way round.
Does the service pay off for a small order?
Not always. For a batch worth a few thousand zloty, a fee of 2,000 to 3,000 PLN net can eat up the whole profit. In that case it is more sensible to increase the order, combine several products in one delivery or buy from a wholesaler in Poland that has spread the costs over a larger batch.
Is import VAT part of the cost of the service?
Import VAT is separate from the fee for the service. The rate depends on the goods, and the base includes the customs value, the duty due and the required additional costs, in the relevant cases excise duty too. The right to deduct depends, among other things, on using the goods for taxable activities and holding the required documents. Running a business alone does not guarantee full deduction. The service fee remains a separate item in the settlement.
When do you pay for an import service?
In the price list described, payments are split into a 30 per cent deposit before the order is carried out and 70 per cent before delivery, usually a week before the vessel enters port. At other companies the schedule may differ, so agree it before signing the contract, together with the terms for refunding the deposit.
Sources
- Allbag service page on importpanel.pl, price list and terms confirmed on 2 November 2026; calculation examples kept as originally read on 8 October 2026.
- Drewry World Container Index, global composite index for a 40-foot container, reading of 29 October 2026, ImportPanel data.
- NBP, table A of mid rates, USD/PLN, reading of 2 November 2026, ImportPanel data.
- Regulation (EU) No 952/2013, Union Customs Code, Articles 70 and 71 (customs value, buying commissions).
- Polish Ministry of Finance, VAT deduction and refund and Investor's tax guide, VAT.
